CAME PXC08 Programming Manual Download Page 24

Page: 24 / 36

ENGLISH

Page

- Manual:

FA00458-EN

- vers.

- 04/2017 - © C

AME S.p.A. - The data and information shown in this manual ar

e t

o be consider

ed as subject t

o change at any time and without the need for any advance warning.

ASSOC. OUTPUT 001

GROUP 001

+ -

USER MENU 001

ENABLED

+ -

ARMING MENU 001

ENABLED

+ -

EVENTS MENU 001

ENABLED

+ -

POSTP. MENU 001

ENABLED

+ -

TELEPHONY MENU 001

ENABLED

+ -

CODE MENU 001

ENABLED

+ -

COD.MGMT.MEN. 001

ENABLED

+ -

KEY MGMT MEN. 001

ENABLED

+ -

DESCRIPTION 001

USER 001

MODIFY 001

MANAGEMENT

▼

▲

Associating output: (Default:

)

Lets you associate a pulse-type output with the entry of the User code on the keypad
Example: used to be able to open a lock through entering a code

Code group: (Default:

)

Lets you associate codes with a group, so that they can be managed simultaneously The op-
eration of this group can be enabled/disabled by the timer

Activating User Menu: (Default:

ENABLED

)

Enables the use of the user code to access the user menu

Activating user menu heading Armings: (Default:

ENABLED

)

Enables the User Code to access the heading Armings on the User Menu

Activating user menu heading Events: (Default:

ENABLED

)

Enables the User Code to access the heading Events on the User Menu

Activating user menu heading Postponement: (Default:

ENABLED

)

Enables the User Code to access the heading Postponement on the User Menu

Activating user menu heading Telephony: (Default:

ENABLED

)

Enables the User Code to access the heading Telephony on the User Menu

Activating user menu heading Code: (Default:

ENABLED

)

Enables the User Code to access the heading Code on the User Menu

Activating user menu heading Code Management: (Default:

ENABLED

)

Enables the User Code to access the heading Code Management on the User Menu

Activating user menu heading Keys Management: (Default:

ENABLED

)

Enables the User Code to access the heading Keys Management on the User Menu

User code description:

Lets you edit the description of the User code

Change technical code:

Lets you change the user code (default user 1: 123456)

Summary of Contents for PXC08





































Search results

Summary of Contents for PXC08

Reviews:

Related manuals for PXC08

Brands by name

Popular brands

CAME PXC08, Programming Manual

Search results

Summary of Contents for PXC08

Reviews:

Related manuals for PXC08

Brands by name

Popular brands