Chapter 5: Installation
Mount the ODU, LPU and surge suppressor
Page
10
8
Tighten gland, bottom cover screws and connect to the
radio.
9
Loosen M8 nuts to remove outer clamp. Slip clamp over
pole and tighten M8 nuts by applying 8 Nm torque. Do
not over tighten to prevent aligning the dish.
PMP 450 AP
1
Using an 8mm nut driver, attach the pole mount’s AP
housing bracket to the unit using the 4 M5 x 16mm
bolts included with the AP.
