Cambium Networks cnPilot Home R200 Series, User Manual

Page: 73 / 136

Web Configuration
pmp-0884 (September)
3-31
SSID It is the basic identity of wireless LAN. SSID can be any alphanumeric or a
combination of special characters. It will appear in the wireless network access
list.
Multiple SSID1~SSID3 CnPilot Home R200x supports 4 SSIDs.
Hidden After the item is checked, the SSID is no longer displayed in the search for the Wi-
Fi wireless network connection list
Broadcast(SSID) After initial State opening, the device broadcasts the SSID of the router to
wireless network
AP Isolation If AP isolation is enabled, the clients of the AP cannot access each other.
MBSSID AP Isolation AP isolation among the devices which are not belong to this AP and along to,
when the option is enabled, the devices which do not belong to this AP cannot
access the devices which are within the AP.
BSSID A group of wireless stations and a WLAN access point (AP) consists of a basic
access device (BSS), each computer in the BSS must be configured with the same
BSSID, that is, the wireless AP logo.
Frequency (Channel) You can select Auto Select and channel 1/2/3/4/5/6/7/8/9/10/11.
HT Physical Mode
Operating
Mode
1. Mixed Mode: In this mode, the previous wireless card can recognize and
connect to the Pre-N AP, but the throughput will be affected
2. Green Field: high throughput can be achieved, but it will affect backward
compatibility, and security of the system
Channel Bandwidth Select channel bandwidth, default is 20 MHz and 20/40 MHz.
Guard Interval The default is automatic, in order to achieve good BER performance, you must
set the appropriate guard interval
Reverse Dirction Grant (RDG)
Enabled: Devices on the WLAN are able to transmit to each other without
requiring an additional contention-based request to transfer (i.e. devices are able
to transmit to another device on the network during TXOP)
Disabled: Devices on the WLAN must make a request for transmit when
communicating with another device on the network