Overview
pmp-0884 (September)
1-7
Configuration template files (to enable rapid configuration setup) are available to help get started quickly with
cnMaestro at (
http://community.cambiumnetworks.com
). After loading these configuration files, you may
override configuration parameter values and manage software setup via cnMaestro.
Accessing and Configuring cnPilot
Devices via
the local GUI (without
cnMaestro)
Before configuring
your router, please see
the
procedure
below for
instructions
on
connecting
the
cnPilot Home device in
your network.
Procedure 3 Configuring the Router
1.
Connect analog phone to
ATA Port with an
RJ11 cable.
2.
Connect the
WAN port to
the
Internet
via
your network’s
modem/switch/router/ADSL
equipment
using an
Ethernet
cable.
3.
If
desired,
connect
one
of
4
available
LAN ports
to
your PC
or
networked
device with an
Ethernet
cable.
cnPilot Home devices
allow you
to
connect
up
to
4
PCs
(or
other Ethernet-connected devices)
directly.
4.
Connect one
end
of
the
power cord to
the
power port of
the
device.
Connect
the
other end
to
the
wall outlet.
5.
Push
the
ON/OFF
button to
power on
the
router.
6.
Check the
Power, WAN, and
LAN LEDs to
confirm
network
connectivity.
Summary of Contents for cnPilot Home R200 Series
