Cambium Networks cnPilot Home R200 Series User Manual Download Page 62

Page: 62 / 136

Web Configuration

pmp-0884 (September)

3-20

DNS Mode

Select DNS mode, options are Auto and Manual:

When DNS mode is Auto, the device under LAN port will automatically

obtains the preferred DNS and alternate DNS.

When DNS mode is Manual, the user should manually configure the

preferred DNS and alternate DNS.

Primary DNS

Enter the preferred DNS address.

Secondary DNS

Enter the secondary DNS address.

Client Lease Time

This option defines how long the address will be assigned to the computer within
the network. In that period, the server does not assign the IP address to the other
computer.

DNS Proxy

Enable or disable; If enabled, the device will forward the DNS request of LAN-side
network to the WAN side network.

Summary of Contents for cnPilot Home R200 Series









































































































































Search results

Summary of Contents for cnPilot Home R200 Series

Reviews:

Related manuals for cnPilot Home R200 Series

Brands by name

Popular brands

Cambium Networks cnPilot Home R200 Series, User Manual

Search results

Summary of Contents for cnPilot Home R200 Series

Reviews:

Related manuals for cnPilot Home R200 Series

Brands by name

Popular brands