Calix ODC-120, Installation Manual

Page: 23 / 44

17
Calix ODC-120 Installation Guide
Proprietary Information: Not for use or disclosure except by written agreement with Calix.
© 2005 Calix. All Rights Reserved.
4.6 Lifting the Cabinet
DANGER
Improper hoisting equipment and procedures can result in serious injury or death.
Observe the following safety measures, as well as all local safety procedures, when
performing the tasks in this section.
Keep the equipment and the cabinet away from any power lines.
Keep bystanders away from work operations at all times.
Only specially trained operators shall be permitted to operate crane equipment for lifting
and setting the cabinet.
Operators should not suspend loads over people, nor should any person work, stand, or
pass under a suspended load.
All persons working with crane equipment shall wear standard safety gear according to
local practices, including, but not limited to, safety helmets, steel-toed shoes, eye protec-
tion, and (when required) insulating gloves.
Do not lift the pallet and cabinet from the ends when using a forklift; lift from the sides
of the pallet only.
Do not operate the crane until all stabilizers are extended and in firm contact with the
ground or adequate support structure. Do not attempt to retract or extend the stabilizers
while a load is suspended from the crane.
SPLIT
SLEEVE (4)
FRONT
BASEPLATE
CLAMP
Fig. 15 : Splice Chamber (Lower View)