![background image](http://html1.mh-extra.com/html/cru/rax-3qj-series/rax-3qj-series_manual_2691068001.webp)
Protecting Your
Digital Assets
™
Protecting Your
Digital Assets
™
CRU
®
RAX
®
3QJ/3QJp Rack Enclosure
Thank you for purchasing CRU’s RAX 3QJ or 3QJp enclosure. RAX 3QJ and
3QJp enclosures are rack-mountable storage enclosures that incorporate
removable drive carriers that make it easy to use multiple hard drives in
the same enclosure. RAX 3QJ and 3QJp enclosures provide four connection
types that allow you the needed flexibility to connect to your host computer,
including USB 3.0 which provides up to a 5 Gbps transfer rate. RAX 3QJp
models also provide write protection to your hard drives with the simple
toggle of a switch on the front bezel.
Features
•
Optional write protection on the RAX 3QJp enclosure prevents data
from being overwritten or altered.
•
TrayFree Models (RAX210) allow for easy insertion and removal of
hard drives. Models with removable carriers (RAX211) enclose and
protect hard drives when removed from the RAX enclosure.
• eSATA, FireWire 800, USB 2.0, and USB 3.0 connections are provided
for wide variety of connectivity.
•
Specially designed drive and carrier interfaces are built to withstand
tens of thousands of insertions.
Download a copy of the complete User Manual at
www.cru-inc.com
.
© 2014 CRU Acquisition Group LLC, ALL RIGHTS RESERVED. RAX
®
and CRU
®
are trademarks of CRU Acquisition Group, LLC and are protected
by trademark law.
Product Warranty
CRU warrants this product to be free of significant defects in material and workmanship for a period of three years from the original date of pur
-
chase. CRU’s warranty is nontransferable and is limited to the original purchaser.
Limitation of Liability
The warranties set forth in this agreement replace all other warranties. CRU expressly disclaims all other warranties, including but not limited
to, the implied warranties of merchantability and fitness for a particular purpose and non-infringement of third-party rights with respect to the
documentation and hardware. No CRU dealer, agent, or employee is authorized to make any modification, extension, or addition to this warranty.
In no event will CRU or its suppliers be liable for any costs of procurement of substitute products or services, lost profits, loss of information or data,
computer malfunction, or any other special, indirect, consequential, or incidental damages arising in any way out of the sale of, use of, or inability
to use any CRU product or service, even if CRU has been advised of the possibility of such damages. In no case shall CRU’s liability exceed the
actual money paid for the products at issue. CRU reserves the right to make modifications and additions to this product without notice or taking
on additional liability.
FCC Compliance Statement: “This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.”
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at this own expense.
In the event that you experience Radio Frequency Interference, you should take the following steps to resolve the problem:
1)
Ensure that the case of your attached drive is grounded.
2)
Use a data cable with RFI reducing ferrites on each end.
3)
Use a power supply with an RFI reducing ferrite approximately 5 inches from the DC plug.
4)
Reorient or relocate the receiving antenna.
FOR OFFICE OR COMMERCIAL USE
Product Models
RAX210-3QJ, RAX211-3QJ, RAX210-3QJp, RAX211-3QJp
Interface Types & Speeds
•
USB 3.0: up to 5 Gbps
• USB 2.0: up to 480 Mbps
•
eSATA: up to 3 Gbps
• FireWire 800: up to 800 Mbps
Drive Types Supported
3.5-inch SATA Hard Drives
Data Connectors
•
One (1) USB 3.0/2.0 connector
•
One (1) eSATA connector
• Two (2) FireWire 800 connectors
Operating System
Requirements
• Windows 8.1, 7, Vista, or XP
• Windows Server 2012, 2008, or 2003 product families
• Mac OS X 10.4.x or higher
• Linux distributions that support the connection type used
Compliance
EMI Standard: FCC Part 15 Class A, CE
EMC Standard: EN55022, EN55024
Shipping Weights
• 17 pounds without drives (includes accessories)
•
23 pounds with drives
Dimensions
16.89” x 16.26” x 1.73” (429mm x 413mm x 44mm)
Technical Support
Your investment in CRU products is backed up by our free technical
support for the lifetime of the product. Contact us through our website,
cru-inc.com/support
or call us at 1-800-260-9800 or +1-360-816-1800.
A9-210-0011-1 Rev. 1.0
Models Covered:
RAX210-3QJ
RAX211-3QJ
RAX210-3QJp
RAX211-3QJp
RAX Branding
2c85m76y
PMS 711C
68c70m
PMS 2726