197
Proprietary Information: Not for use or disclosure except by written agreement with Calix.
© Calix. All Rights Reserved.
Parameters
You can provision the following parameters for a video service on an xDSL port:
Parameter
Description
Valid Options
Subscriber ID
Subscriber ID information, such as phone number, or account
number.
text string
(blank) ‡
Description
Optional description field for the port, subscriber address, name, or
service.
text string
(blank) ‡
BW Profile*
Name of bandwidth profile to apply to the service.
text string
Any established
Ethernet bandwidth
profile
Multicast Profile*
Name of Ethernet multicast profile to apply to the port.
Note:
To create video service with MVR, this profile must
reference an MVR profile where the MVR VLAN ID is that of the
Multicast VLAN. The MVR Profile must be enabled for correct
configuration.
text string
Any established
multicast profile
Multicast White List
Name of optional multicast white list(s) to apply to the video
service that defines global allowable multicast IP ranges.
Select any single name of a previously created list, or hold down
the Ctrl key to select or deselect multiple items.
Note:
A multicast white list can be applied at the time of creating
the service, or later to an existing service as follows:
In the Navigation Tree, click
XDSL#
.
In the Work Area, click
Port
>
Multicast White List
>
Create
,
and then select the service and multicast white list(s).
Any existing multicast
white list
Service Tag Action*
Name of service tag action to use for the service.
For video service with MVR, select the service tag action that
references the Unicast VLAN and has been associated with
the matched traffic rule of the Unicast VLAN stream.
If the "specified in service" option was selected for either the
Outer Tag or the Inner Tag in the service tag action, enter the
applicable VLAN IDs.
text string
Any established service
tag action
S-VLAN (Outer Tag)
Specifies the service VLAN ID, if the Service Tag Action
references "Specified in Service" for the Outer Tag.
none, any VLAN
created on the system
C-VLAN (Inner Tag)
Specifies the customer VLAN ID, if the Service Tag Action
references "Specified in Service" for the Inner Tag.
none, any VLAN
created on the system
*Required fields
‡ Default
To create a video service on an xDSL port
1.
On the Navigation Tree, click the xDSL port or bonding group on which you want to
add a video service.
2.
In the Work Area, click
Port
>
Services
>
Form
.
Note:
To create a service on an xDSL Bonded interface, on the Navigation Tree, click
the xDSL Group under the VDSL2 card, and then in the Work Area, click
Services
>
Form
.
3.
Reference the table above to configure the parameters.
4.
In the menu, click
Apply
.
