157
Proprietary Information: Not for use or disclosure except by written agreement with Calix.
© Calix. All Rights Reserved.
Parameter
Description
Valid Options
S-VLAN (Outer Tag)
Indicates the customer-specific tag for the VoIP service VLAN. The
definition references a system default tag action that specifies the
classifying and marking of packets from the subscriber port into the
service VLAN specified in the IP host.
2-4093
(Except for 1002-1005 which
are reserved for E-Series
operation.)
Host Protocol
Host protocol for the SIP client. If you select "static," you must also
enter a static IP address, mask, and gateway addresses.
static, dhcp ‡, dhcp-v6
Host Name
Host-name that will be transmitted in DHCP Option 81. The ‘Host Name’
must be configured with a fully qualified domain name.
text string
Static IP
IP address statically assigned to the VDSL2 card if the host protocol is
static. This attribute is ignored, yet preserved, if the host protocol is
DHCP.
4-byte IP address
Static IP Mask
IP network mask assigned to the VDSL2 card if the host protocol is
static. This attribute is ignored, yet preserved, if the host protocol is
DHCP.
4-byte IP address
Static IP Gateway
Static IP gateway 4-byte address for the VDSL2 card to use in routing
its traffic to the SIP server, if the host protocol is static. This attribute is
ignored, yet preserved, if the host protocol is DHCP.
4-byte IP address
Ping
Whether to respond to ping messages.
enabled ‡, disabled
Traceroute
Whether to respond to traceroute messages.
enabled ‡, disabled
Configuration File
Instance
A configuration name instance is mapped to a retrieved DSL
Configuration file, whose contents will be applied to all DSL ports on the
VDSL2 card.
The configuration name specified in the IP Host must match the
configuration name specified in the Retrieve/Apply DSL Configuration
File operation. A configuration name is specified by instance number
alone or by “voip-<1 through 4>.”
voip-1 - Instance for VoIP (1)
voip-2 - Instance for VoIP (2)
voip-3 - Instance for VoIP (3)
voip-4 - Instance for VoIP (4)
None ‡, voip1-4, enter value
To create an IP Host for voice services
1.
From the Navigation Tree, click the VDSL card where you want to create an IP Host for
voice services.
2.
In the Work Area, click
IP Hosts
>
Create
.
3.
Reference the table above to configure the parameters.
4.
Click
Create
.
For CLI:
create ip-host <[shelf]card/name>
delete ip-host <[shelf]card/name>
set ip-host <[shelf]card/name>
show ip-host [[shelf]card/name]
Example:
create ip-host 1/tdmgw outer-vlan 300 host-config static static-ip
192.168.32.100 static-gw 192.168.32.1 static-netmask 255.255.240.0
