Calix E7-2 Application Manual Download Page 10

Page: 10 / 225

Proprietary Information: Not for use or disclosure except by written agreement with Calix.

xDSL Subscriber Access Support

The Calix E-Series Ethernet service platform leverages VDSL2 and ADSL2+ technology,

along with an Ethernet switching fabric, to perform L2 aggregation / switching and layer-3-

aware service delivery. Up to two dedicated 10 Gigabit and four 2.5 or 1 Gigabit Ethernet

uplinks can be leveraged to provide high capacity service delivery on a per-chassis basis.

E7-2 VDSL2-48 Overlay Line Card

Interfaces:



48x DSL Overlay ports with corresponding 600- or 900-Ohm integrated splitters



Four 1GE / 2.5GE SFP MSA sockets, and two 1GE / 10GE SFP+ MSA sockets

Features:



The VDSL2-48 also supports pair bonding in both ADSL2+ and VDSL2 modes.



One VDSL2-48 line card can be installed in an E7-2 chassis.



Integrated splitters provide a means to extract analog voice form the service loop and

terminate it on an existing DLC or analog POTS port on a switch line bay. One E7-2

VDSL2-48 line card can be plugged into a Calix E7-2 shelf to create a compact, high

density DSL overlay node, with Ethernet aggregation and transport, ideal for copper

based delivery of IP services leveraging existing POTS infrastructure, across the access

network.



Rev 13 and above of the VDSL2-48 card supports 600/900 Ω impedance, compatible

with all E7 releases. There is no need to select between 600 and 900 Ω impedance and

the splitter design accommodates either impedance without configuration.
POTS interfaces of the VDSL2-48 line card have the following characteristics:



Impedance of 600 Ω + 2.16 μf, supporting ETSI based loop plants



Impedance of 900 Ω + 2.16 μf, supporting ANSI based loop plants



Loop current of up to 25mA (during normal operation), and 18mA (during battery

backup)

E7-2 VDSL2-48 r2 Overlay Line Card

This card is backward compatible with the original E7-2 VDSL2-48 Overlay line card.

E7-2 VDSL2-48C Combo Line Card

Interfaces:



48x Combo DSL and POTS ports, two 1GE / 2.5GE SFP MSA sockets



Two 1GE/10GE SFP+ MSA sockets

Summary of Contents for E7-2
































































































































































































































Search results

Summary of Contents for E7-2

Reviews:

Brands by name

Popular brands

Calix E7-2, Application Manual

Search results

Summary of Contents for E7-2

Reviews:

Brands by name

Popular brands