160
Proprietary Information: Not for use or disclosure except by written agreement with Calix.
© Calix. All Rights Reserved.
Parameter
Description
Valid Options
Pattern
Dial plan rule pattern.
^
Required to match from the start of the dial string
|
Required vertical bar (pipe key) as a rule-separating
character at the end of each rule in the dial plan
[a-b]
Square brackets are used to define options or sub-
ranges of allowable digits
{n}
Curly brackets are used to define the number of of
allowed digits in a string (range match length). Applies
only to variable directly preceding it.
*
Wild card match - Matches on a variable number of
digits
T
Variable digit timeout
S
Star key on the handset - applies to Vertical Service
Codes
c
Confirmation tone is played after star code is
executed
r
Recall tone is played during call forwarding sequence
d
Dial tone is played during a call forwarding sequence
,
(Comma) Outside dial tone is played if preceded by a
9
n
no local disconnect
#
Pound indicator
b
/*Must immediately follow '#'*/
Note:
The Maximum Network Dial Plan Table size is 100
rows x 28 (2800 bytes).
A rule cannot exceed 28 bytes (or characters), because a
rule must fit in a single row. The required "|" character at the
end of each rule limits the rule to 27 characters. A rule is not
allowed to overlap rows.
^
|
[a-b]
{n}
*
T
S
c
r
d
,
n
#
* Required
‡ Default value
To create a dial plan
1.
On the Navigation Tree, click the unit.
2.
Click
Profiles
>
Service
>
Dial Plan
.
3.
In the menu, click
Create
.
4.
Reference the table above to configure the parameters.
5.
Click
Create
.
6.
Apply the custom dial numbering plan when you create a SIP gateway service.
For CLI:
create dial-plan <name> [digit-short-timer|digit-long-timer]
delete dial-plan <name>
set dial-plan <p-name> [rule|name|digit-short-timer|digit-long-
timer]
show dial-plan [<name>]
