DESCRIPTION
MAINTAINING
Gate
Every Month
TASK
Inspect swivel arm, hinges, posts, and other parts for wear, damage or
mis-alignment. Lubicate if necessary. There should be no squeaking.
Photocell Sensor
Check
Every Month
Place your hand over the photocell sensor infrared beam when the gate is
closing. The gate must stop and reverse, if not contact installer or support.
Safety Edge
Every Month
Gate should stop moving when press the safety edges. If it doesn’t, check
the battery (3V CR2450) and replace if need. Battery life: 2-3 years.
Emergency
Release
Every Month
Use the key and activate the emergency Release. Manually push the gate
to ensure it can fully open and close. If not contact installer or support.
Free Movement
Check
Every Month
Use the key and activate the emergency Release. Manually push the gate
by hand to ensure it move freely and easily with little to no resistance.
Warning Signs
Every 3 Months
Warning signs should be installed and visible by people inside/outside of
the gate. Replace warning signs if damaged or wear and tear.
Force Check
Every 6 Months
Gate should reverse when it comes in contact with object. Test both open
and close ERD force.
Accessories
Every Year
Check all accessories including remotes, loop detectors, keypad, etc. to
make sure they are all operating properly.
Electrical Wiring
and Connection
Every Year
Check all electrical wiring connections to make sure none are loose or
damaged. Use LICENSED ELECTRICIAN for any repair or replace.
Chassis Sleeve
Anchors
Every Year
Check each anchors to make sure the anchors are not loose or damaged.
Replace if need.
Backup Battery
Every 4 Years
Replace new battery
MAINTENANCE
CM9-2 INSTALL ATION AND OWNER MANUAL V.3.1 | 2023.06.01
PAGE 35
