Viper SC+™ IP Router for Licensed Spectrum PN 001-5008-000 Rev. C
| Page 55
Communication Path:
This column indicates the communication path from this unit to the remote.
Direct
means that there is no intervening unit.
Relay Point
means that there is a relay point in between.
Setting:
Displays the current setting for the remote that is represented in the table row and allows you to change it if
required.
Dynamic
The remote unit was discovered dynamically by sending or receiving a packet.
Relay Point
This unit is a static entry in the remote table.
Delete
— Allows you to remove entries from the table. To delete a unit from the table, click Delete in the row of the
table that represents the unit to be deleted.
Save
— Click Save to save any changes you have made to the Neighbor Table.
Cancel
— Click Cancel to cancel any change.
4.3.3.2.
Neighbor Table for Router Mode
The Viper SC+ is an IP packet router radio that forwards packets to their destination based on routing statements
(which network to send a packet to) in the routing table. The routing statements are automatically populated into the
routing table by entries from the Neighbor Table (shown in the following figure). Neighbors can be enrolled into the
Neighbor Table by three different methods: Auto-Scan, Manual Scan, and Static Entries.
Figure 36 – RF Network Settings – Neighbor Table (Router Mode)
