Viper SC+™ IP Router for Licensed Spectrum PN 001-5008-000 Rev. C
| Page 40
Bandwidth, Bit Rate, and Modulation
Displays the Bandwidth, and the Bit Rate and Modulation for the configured channel. When applicable, separate
Bit Rates and Modulation will be displayed for the Data Packet and Control Packet.
Multi-Speed Mode
When Multi-Speed mode is enabled, the units communicate with each other at a fixed speed. A unit can be set to
operate as a Multi-Speed Master or as a Multi-Speed Slave. A unit set to operate in Multi-Speed slave mode
matches the speed of the unit set to operate in Multi-Speed Master mode. In a network operating with Multi-
Speed, there must be at most one Multi-Speed Master unit and all other units must operate in Multi-Speed Slave
mode. The Multi-Speed Mode can be configured in RF Network Settings » RF Network.
Mode
Indicates the mode of operation (ANSI, ANSI 900, ETSI)
Refresh
— Click Refresh to update the information displayed in the current tab.
4.1.3.
BASIC SETTINGS
The Basic Settings tab is the third (right-most) tab of the Home page of the Viper Web interface. To navigate to this tab,
select Home from the main navigation menu (or click Home) and click Basic Settings. In this tab you can make basic
configuration settings in the Viper router.
Figure 28 – Home – Basic Settings
Basic Settings
Station Name
This is the user-defined name given to the unit to differentiate it from other units and used by various services.
Enter a name up to forty (40) characters in length that is unique (different from the names assigned to other units)
on the network.
