Viper SC+™ IP Router for Licensed Spectrum PN 001-5008-000 Rev. C
| Page 101
4.7.
SECURITY
The Security page contains four tabs: Password, AES Encryption, RADIUS, and VPN.
4.7.1.
PASSWORD
Password is the first (left-most) tab of the Security page. To navigate to this tab, select Security from the main menu.
This tab allows you to set User Names and assign and change passwords for users of the Viper to log in to the Viper
Web interface.
Figure 59 – Security – Password
User Name
User Name
This field allows you to add new user names for security on the Viper. For initial installation, all Vipers are shipped
with the default User Name of Admin. If you want the Viper to check the password only at log in and not require a
valid user name to be entered, click to place a check in the box labeled Any.
Note:
If you are using a RADIUS server, the User Name will always be required.
Password
Old Password
For initial installation, the default password for the Admin user name is ADMINISTRATOR (all uppercase letters).
For subsequent access, use the current password.
New Password
Enter a string of any letters or numbers of at least 8 characters and not exceeding 15 characters in length.
CAUTON:
Do not lose the new password or you will not be able to gain access to the unit. If you lose your password,
you will need to contact CalAmp for technical support.
