CAI 600-NDIR, User Manual

Page: 81 / 86

Section 12 Model 601/601P/602/602P/603 NDIR Analyzer
California Analytical Model 600_NDIR_Series_v10.0 CE Operators Manual
Page 81 of 86
12.5. Control commands
12.5.1. SRES: Reset
Command Response Description
_SRES_K0 _SRES_s Reset
12.5.2. SPAU: Pause
Command Response Description
_SPAU_K0 _SPAU_s Pause mode
12.5.3. STBY: Standby
Command Response Description
_STBY_K0 _STBY_s Standby mode for all channels
_STBY_Km _STBY_s Standby mode for channel m
12.5.4. SNGA: Open valve for zero gas calibration
Command Response Description
_SNGA_K0 _SNGA_s Open all three zero gas valves
_SNGA_Km _SNGA_s Open valve for zero gas calibration of
actual measuring range
_SNGA_Km_Mn _SNGA_s Open valve for zero gas calibration of
range Mn
12.5.5. SEGA: Open valve for end gas calibration
Command Response Description
_SEGA_K0 _SEGA_s Open all three end gas valves
_SEGA_Km _SEGA_s Open valve for end gas calibration of
actual measuring range
_SEGA_Km_Mn _SEGA_s Open valve for end gas calibration of
range Mn
12.5.6. SSPL: Purge Analyzer with zero gas
Command Response Description
_SSPL_K0 _SSPL_s Open zero gas valve and purge all
channels
12.5.7. SATK: Start automatic calibration
Command Response Description
_SATK_Km _SATK_s Start automatic calibration with
selected range of channel m
_SATK_Km_Mn _SATK_s Start automatic calibration for channel
m, Range n
12.5.8. SEMB: Set measuring range
Command Response Description
_SEMB_Km_Mn _SEMB_s Set measuring range
Auto range will be disabled