manualshive.com logo in svg

Cadillac SRX 2010, Owner'S Manual, Page: 46 / 471

Share
Download
Cadillac SRX 2010 Owner'S Manual Download Page 46

Seats and Restraints

2-11

3. Lift the lever located on the top

of the seatback. The rear seat
lock indicator (A) extends when
the seatback is unlocked.

4. Fold the seatback forward. The

rear seat lock indicator (A)
retracts when the seatback is
locked.

Keep the seat in the upright locked
position when not in use.

To Raise the Seatback:

1. Lift the lever located on top

of the seatback. Raise the
seatback and release the lever.
The rear seat lock indicator (A)
extends when the seatback is
unlocked.

2. Tilt the seatback rearward until

it locks in the upright position.
The rear seat lock indicator (A)
retracts when the seatback is
locked.

To Recline the Seatback:

1. Lift and hold the lever located on

top of the seatback. The rear
seat lock indicator (A) extends
when the seatback is unlocked.

2. Tilt the seatback rearward, then

release the lever when the
seatback is in the desired
position. The rear seat lock
indicator (A) retracts when the
seatback is locked.

Summary of Contents for SRX 2010
























































































































































































































































































































































































































































































Reviews:

No comments