Cadillac SRX 2010 Owner'S Manual Download Page 337

Page: 337 / 471

9-32

Vehicle Care

To adjust the vertical aim:

1. Open the hood. See

Hood on

page 9

‑

for more information.

Base Vehicle

Up-level Vehicle

2. Locate the aim point at

the center inner projector
condensing lens of the low-beam
headlamp (not the outer lens).

3. Measure the distance from the

ground to the aim dot on the
low

‐

beam headlamp. Record the

distance.

4. At the wall measure from the

ground upward (A) to the
recorded distance from
Step 3 and mark it.

5. Draw or tape a horizontal line (B)

on the wall the width of the
vehicle at the height of the mark
in Step 4.

Summary of Contents for SRX 2010
























































































































































































































































































































































































































































































Search results

Summary of Contents for SRX 2010

Reviews:

Cadillac SRX 2010, Owner'S Manual, Page: 337 / 471

Search results

Summary of Contents for SRX 2010

Reviews: