Home
/
Cadillac
/
SRX 2010
/
Owner'S Manual

Cadillac SRX 2010, Owner'S Manual, Page: 104 / 471

Share

Page: 104 / 471

Cadillac SRX 2010 Owner'S Manual Download Page 104

Storage

3-7

D-Ring Sliders

There are four D-Ring sliders that
move along rails on both sides of
the cargo management area. These
can be used as tie-downs when
storing cargo.

Installing D-Ring Sliders

To install the D-Ring slider (A),
insert it into the channel (B) located
in the middle of both rails.

The loop of the D-Ring slider must
be facing inward towards the
storage area and the ring must be in
the up position for proper usage.

Push the button to move the D-Ring
slider either towards the front or the
rear of the vehicle. The rings can be
locked into various positions along
the rail.

U-Rail

For vehicles with a U-Rail system,
move the gate around the u-shaped
track to store and secure cargo in
place.

«
...
102
103
104
105
106
...
»

Summary of Contents for SRX 2010
























































































































































































































































































































































































































































































Reviews:

No comments