Cadillac SRX 2010 Owner'S Manual Download Page 350

Page: 350 / 471

Vehicle Care

9-45

Engine Compartment
Fuse Block

To remove the fuse block cover,
press the clips on the cover and lift
it straight up.

The vehicle might not have all the
fuses and features listed.

Notice:

Spilling liquid on any

electrical components on the
vehicle may damage it. Always
keep the covers on any electrical
component.

Engine Compartment Fuse Block

J-Case

Fuses

Usage

Wiper

Vacuum Pump

Anitlock Brake
System Pump

J-Case

Fuses

Usage

Rear Electrical
Center 1

Rear Electrical
Center 2

Not Used

Summary of Contents for SRX 2010
























































































































































































































































































































































































































































































Search results

Summary of Contents for SRX 2010

Reviews:

Cadillac SRX 2010, Owner'S Manual, Page: 350 / 471

Search results

Summary of Contents for SRX 2010

Reviews: