Cadillac SRX 2010 Owner'S Manual Download Page 345

Page: 345 / 471

9-40

Vehicle Care

Turn Signal Lamps

To replace one of these bulbs:

1. Open the liftgate. See

Liftgate

(Manual) on page 1

‑

Liftgate (Power) on page 1

‑

A. Push Pin

B. Taillamp Cover

2. Pull on push pin (A) to release

the taillamp cover (B).

3. Remove the taillamp cover from

the lamp assembly by pulling
rearward from the top to
unfasten from snap tabs.

4. Remove the two screws from the

taillamp assembly.

5. Pull the taillamp assembly

straight back to remove.

A. Turn Signal Lamp

B. Back-Up Bulb/Socket

6. Turn the turn signal lamp (A)

bulb socket counterclockwise to
remove it from the taillamp
assembly.

7. Pull the bulb straight out from

the socket.

Summary of Contents for SRX 2010
























































































































































































































































































































































































































































































Search results

Summary of Contents for SRX 2010

Reviews:

Cadillac SRX 2010, Owner'S Manual, Page: 345 / 471

Search results

Summary of Contents for SRX 2010

Reviews: