Cadillac SRX 2010 Owner'S Manual Download Page 343

Page: 343 / 471

9-38

Vehicle Care

Low-Beam Headlamps/Daytime
Running Lamps (DRL),
High-Beam Headlamps (Base)

1. Remove the top cap for the

low-beam headlamp/DRL bulb
replacement from the back of the
headlamp assembly.

2. Remove the bottom cap for the

high-beam headlamp bulb
replacement from the back of the
headlamp assembly.

3. Disconnect electrical connector.

4. Remove the bulb socket from

the headlamp assembly.

5. Replace the bulb in the bulb

socket.

6. Install the bulb socket in the

headlamp assembly.

7. Connect the electrical connector.

8. Install the cap with the down

arrow pointing down in the back
of the headlamp assembly.

9. For driver side, reinstall the

underhood electrical center
cover by latching three clips.

10. For passenger side, reinstall

the air filter/cleaner assembly
base by pushing to seat . Verify
the base is seated securely,
then install the engine air filter/
cleaner assembly.

High/Low

‐

Beam Headlamps

(Up-Level)

The high/low beam headlamps on
the up-level are High Intensity
Discharge (HID) and should be
replaced at the dealer/retailer.

Summary of Contents for SRX 2010
























































































































































































































































































































































































































































































Search results

Summary of Contents for SRX 2010

Reviews:

Cadillac SRX 2010, Owner'S Manual, Page: 343 / 471

Search results

Summary of Contents for SRX 2010

Reviews: