Cadillac CTS 2019 Owner'S Manual Download Page 90 | Manualshive

Page: 90 / 350

background image

Cadillac CTS/CTS-V Owner Manual (GMNA-Localizing-MidEast-12470572) -

2019 - crc - 6/21/18

SEATS AND RESTRAINTS

89

{

Warning

Children who are up against,
or very close to, any airbag when it
inflates can be seriously injured or
killed. Never put a rear-facing child
restraint in the front outboard seat.
Secure a rear-facing child restraint
in a rear seat. It is also better to
secure a forward-facing child
restraint in a rear seat. If you must
secure a forward-facing child
restraint in the front outboard seat,
always move the front passenger
seat as far back as it will go.

Child restraints are devices used to
restrain, seat, or position children in
the vehicle and are sometimes called
child seats or car seats.

There are three basic types of child
restraints:

.

Forward-facing child restraints

.

Rear-facing child restraints

.

Belt-positioning booster seats

The proper child restraint for your
child depends on their size, weight,
and age, and also on whether the
child restraint is compatible with the
vehicle in which it will be used.

For each type of child restraint, there
are many different models available.
When purchasing a child restraint, be
sure it is designed to be used in a
motor vehicle. The restraint
manufacturer's instructions that come
with the restraint state the weight and
height limitations for a particular
child restraint. In addition, there are
many kinds of restraints available for
children with special needs.

{

Warning

To reduce the risk of neck and head
injury in a crash, infants and
toddlers should be secured in a
rear-facing child restraint until age
two, or until they reach the
maximum height and weight limits
of their child restraint.

«
...
88
89
90
91
92
...
»

Summary of Contents for CTS 2019































































































































































































































































































































































Reviews:

No comments

Related manuals for CTS 2019

Brand: Daihatsu Pages: 43

Brand: Blue Ox Pages: 7

Brand: Shad Pages: 3

Brand: Dometic Pages: 158

Brand: Quadratec Pages: 12

1506-PHX Cargo Plus

Brand: Ranger design Pages: 8

Brand: AUTOTECH Pages: 1

Brand: T-Mobile Pages: 2

Brand: Cadillac Pages: 352

Brand: Xpresskit Pages: 18

Brand: Thule Pages: 3

Brand: v.link Pages: 12

2010 MX-5 Miata

Brand: Mazda Pages: 8

RAV-4 2015 Series

Brand: Toyota Pages: 50

Brand: Audi Pages: 63

Brand: AL-KO Pages: 40

Brand: Honda Pages: 268

Brand: J. Strong Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands