Cadillac CTS 2019 Owner'S Manual Download Page 144

Page: 144 / 350

Cadillac CTS/CTS-V Owner Manual (GMNA-Localizing-MidEast-12470572) -

2019 - crc - 6/21/18

INSTRUMENTS AND CONTROLS

143

Steering

This setting adjusts how the steering
feels from a lighter to a reduced assist
for more steering feel.

Touch Auto (follows the MODE
switch), Tour, Sport, or Track.

Suspension

This setting adjusts the suspension
from a comfortable to a more
responsive tune.

Touch Auto (follows the MODE
switch), Tour, Sport, or Track.

Climate and Air Quality

Touch and the following may display:

Auto Fan Speed

Air Quality Sensor

Auto Cooled Seats

Auto Heated Seats

Auto Defog

Auto Rear Defog

Auto Fan Speed

This setting specifies the amount of
airflow when the climate control fan
setting is Auto Fan.

Touch Low, Medium, or High.

Air Quality Sensor

This setting switches the system into
Recirculation Mode based on the
quality of the outside air.

Touch Off, Low Sensitivity, or High
Sensitivity.

Auto Cooled Seats

This setting automatically turns on
and regulates the ventilated seats
when the cabin temperature is warm.
See

Heated and Ventilated Front Seats

Touch Off or On.

Auto Heated Seats

This setting automatically turns on
and regulates the heated seats when
the cabin temperature is cool. The
auto heated seats can be turned off by

using the heated seat buttons on the
center stack. See

Heated and Ventilated

Front Seats

If equipped with an auto heated
steering wheel, this feature will turn
on when the auto heated seats
turn on.

Touch Off or On.

Auto Defog

This setting automatically turns the
front defogger on when the engine is
started.

Touch Off or On.

Auto Rear Defog

This setting automatically turns the
rear defogger on when the engine is
started.

Touch Off or On.

Collision/Detection Systems

Touch and the following may display:

Alert Type

Forward Collision System

Adaptive Cruise Go Notifier

Lane Change Alert

Summary of Contents for CTS 2019































































































































































































































































































































































Search results

Summary of Contents for CTS 2019

Reviews:

Related manuals for CTS 2019

Brands by name

Popular brands

Cadillac CTS 2019, Owner'S Manual

Search results

Summary of Contents for CTS 2019

Reviews:

Related manuals for CTS 2019

Brands by name

Popular brands