Cadillac CTS 2019 Owner'S Manual Download Page 164

Page: 164 / 350

Cadillac CTS/CTS-V Owner Manual (GMNA-Localizing-MidEast-12470572) -

2019 - crc - 6/21/18

CLIMATE CONTROLS

163

Climate Controls

Climate Control Systems

Dual Automatic Climate Control

System . . . . . . . . . . . . . . . . . . . . . . . . . . 163

Rear Climate Control System . . . . 168

Air Vents

Air Vents . . . . . . . . . . . . . . . . . . . . . . . . . . 170

Maintenance

Passenger Compartment Air

Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171

Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171

Climate Control Systems

Dual Automatic Climate Control System

The climate control buttons on the center stack and on the climate control
display are used to adjust the heating, cooling, and ventilation.

Center Stack Climate Controls

1. Driver and Passenger

Temperature Controls

2. Fan Control

3. OFF (Fan)

4. Driver and Passenger Heated and

Ventilated Seats (If Equipped)

5. Recirculation

6. Rear Window Defogger

7. Defrost

8. AUTO (Automatic Operation)

Summary of Contents for CTS 2019































































































































































































































































































































































Search results

Summary of Contents for CTS 2019

Reviews:

Related manuals for CTS 2019

Brands by name

Popular brands

Cadillac CTS 2019, Owner'S Manual

Search results

Summary of Contents for CTS 2019

Reviews:

Related manuals for CTS 2019

Brands by name

Popular brands