Cadillac CTS 2019 Owner'S Manual Download Page 307 | Manualshive

Page: 307 / 350

background image

Cadillac CTS/CTS-V Owner Manual (GMNA-Localizing-MidEast-12470572) -

2019 - crc - 6/21/18

306

VEHICLE CARE

Jump Starting

For more information about the
vehicle battery, see

If the battery has run down, try to use
another vehicle and some jumper
cables to start your vehicle. Be sure to
use the following steps to do it safely.

{

Warning

Batteries can hurt you. They can be
dangerous because:

.

They contain acid that can
burn you.

.

They contain gas that can
explode or ignite.

.

They contain enough
electricity to burn you.

If you do not follow these steps
exactly, some or all of these things
can hurt you.

Caution

Ignoring these steps could result in
costly damage to the vehicle that
would not be covered by the vehicle
warranty. Trying to start the vehicle
by pushing or pulling it will not
work, and it could damage the
vehicle.

1. Good Battery Positive

Terminal

2. Good Battery Negative

Terminal

3. Discharged Battery Remote

Positive terminal

4. Discharged Battery Remote

Negative Ground Terminal

The jump start positive terminal (1)
and negative post (2) are on the
battery of the vehicle providing the
jump start.

The jump start remote positive
terminal (3) and the remote negative
ground terminal (4) for the discharged
battery are on the passenger side of
the vehicle.

The positive jump start connection for
the discharged battery is under a red
cover. Remove the cover to expose the
terminal.

1. Check the other vehicle. It must

have a 12-volt battery with a
negative ground system.

Caution

If the other vehicle does not have a
12-volt system with a negative
ground, both vehicles can be

(Continued)

«
...
305
306
307
308
309
...
»

Summary of Contents for CTS 2019































































































































































































































































































































































Reviews:

No comments

Related manuals for CTS 2019

Brand: Jabra Pages: 2

Brand: Jabra Pages: 38

Brand: Kolpin Pages: 25

Brand: Daewoo Pages: 68

Brand: Hyundai Pages: 437

PICASSO XSARA DESIRE 1.6 - MESUREMENT

Brand: CITROEN Pages: 2

Brand: Bestop Pages: 11

Brand: Whispbar Pages: 14

2014 Insignia VXR SuperSport

Brand: Vauxhall Pages: 56

Brand: Dometic Pages: 158

Brand: Cadillac Pages: 522

Brand: Volvo Pages: 10

DAF CHARGEMAX 90

Brand: Paccar Pages: 40

2008 B2300 Truck

Brand: Mazda Pages: 280

Brand: Roadmaster Pages: 4

Brand: Kuda-Phonebase Pages: 3

Brand: Motoalliance Pages: 4

Civic Coupe 2009

Brand: Honda Pages: 414

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands