Cadillac CTS 2019 Owner'S Manual Download Page 16

Page: 16 / 350

Cadillac CTS/CTS-V Owner Manual (GMNA-Localizing-MidEast-12470572) -

2019 - crc - 6/21/18

IN BRIEF

To adjust the steering wheel:

1. Pull the lever down.

2. Move the steering wheel up

or down.

3. Pull or push the steering wheel

closer or away from you.

4. Pull the lever up to lock the

steering wheel in place.

Power Tilt and Telescoping Wheel

If equipped, the control is on the left
side of the steering column.

Push the control up or down to tilt
the steering wheel up or down.

Push the control forward or
rearward to move the steering
wheel toward the front or rear of
the vehicle.

Do not adjust the steering wheel while
driving.

To set the power tilt wheel memory
position, see

Memory Seats

Interior Lighting

Dome Lamp

To change the dome lamp settings,
press the following:

OFF :

Turns the lamp off, even when a

door is open.

DOOR :

The lamp comes on when a

door is opened.

ON :

Turns the lamp on.

Reading Lamps

There are front and rear reading
lamps on the overhead console and
over the rear passenger doors. These
lamps come on when any door is
opened.

Summary of Contents for CTS 2019































































































































































































































































































































































Search results

Summary of Contents for CTS 2019

Reviews:

Related manuals for CTS 2019

Brands by name

Popular brands

Cadillac CTS 2019, Owner'S Manual

Search results

Summary of Contents for CTS 2019

Reviews:

Related manuals for CTS 2019

Brands by name

Popular brands