Cadillac CTS 2019 Owner'S Manual Download Page 44 | Manualshive

Page: 44 / 350

background image

Cadillac CTS/CTS-V Owner Manual (GMNA-Localizing-MidEast-12470572) -

2019 - crc - 6/21/18

KEYS, DOORS, AND WINDOWS

43

Transmitters to the Vehicle

”

under

Remote Keyless Entry (RKE) System
Operation

.

Do not leave the key or device that
disarms or deactivates the
theft-deterrent system in the vehicle.

Exterior Mirrors

Convex Mirrors

{

Warning

A convex mirror can make things,
like other vehicles, look farther
away than they really are. If you cut
too sharply into the right lane, you
could hit a vehicle on the right.
Check the inside mirror or glance
over your shoulder before changing
lanes.

The driver and passenger side mirrors
are convex shaped. A convex mirror's
surface is curved so more can be seen
from the driver seat.

Power Mirrors

To adjust each mirror:

1. Press L or R to select the driver

or passenger side mirror.

2. Press the arrows on the control

pad to move the mirror up,
down, right, or left.

3. Adjust each mirror so that a little

of the vehicle and the area
behind it can be seen.

4. Press

O

to deselect the mirror.

«
...
42
43
44
45
46
...
»

Summary of Contents for CTS 2019































































































































































































































































































































































Reviews:

No comments

Related manuals for CTS 2019

Brand: Oldsmobile Pages: 360

Brand: RAM Commercial Pages: 12

Brand: Kolpin Pages: 25

MOLLE PANELS RAM 2500

Brand: PUTCO Pages: 4

Brand: Westfalia Pages: 18

Brand: Icom Pages: 20

1966 Spider 105

Brand: Alfa Romeo Pages: 46

Brand: Rugged Ridge Pages: 3

Brand: A-Tach Mounts Pages: 2

Brand: JSPORT Pages: 2

Brand: Z Flash Pages: 4

Brand: ideus Pages: 116

Brand: Discount Car Stereo Pages: 11

Brand: INNO Pages: 3

c4 picasso 2006

Brand: CITROËN Pages: 266

Brand: Racepak Pages: 17

Brand: Malone Pages: 16

ECHOMASTER PRO ParkAlert PS-TRUCK30

Brand: AAMP Global Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands