Cadillac CTS 2007, User Manual

Page: 48 / 144

When transmitting data to the unit, ensure the
format is the same as that on the screen. For the
system to be able to properly search for an
address; standard street and directional
abbreviations should be used. Instead of “West
Hall Road” use “W Hall Rd.”
When you press the Receive key, the system will
ask you to send the data. Hold the Palm near
the infrared receiver located in the upper
right corner of the screen and transmit. When the
information has been successfully received,
you will be able to use it to help plan your route.
After receiving the beamed data, the screen
will display this data. A search must be performed
to find the matching data in the navigation
database. Turn the TUNE/SEL knob to select a
field to search, then press the Search key. Search
will be highlighted if the field is searchable.
You may be requested to select a city or street to
narrow the search. After successfully finding the
match, you can use the reconfigurable soft keys to
map, set the destination, or calculate the route.
If the data cannot be found in the navigation
database, “no data found” will display. If
this occurs, select another field to search. Repeat
this process until all search fields have been
checked or a match is found.
You may also select information from the All POI
or Nearby POI menus to send to your Palm
using the INFO button.
A second way to access the Beam screen is
through the Address Book screen. See “Address
Book” under
Main Menu on page 9 for more
information.
All POI (Points of Interest)
This option allows you to choose a destination
from the all POI list.
There are four ways to limit a search for a POI
from this screen:
•
Choose a city, village, township, or county.
•
Choose a state.
•
Choose a category.
•
Enter the name of the POI.
48