Cadillac CTS 2007 User Manual Download Page 44

Page: 44 / 144

Back:

Press this key to return to the

previous menu.

Edit:

Press this key to change your stored trips.

Use this function to change the order or to
delete any or all waypoints or the destination
within a trip.

To change the order of a stored trip, do the
following:

1. Scroll to the waypoint or destination you want

to move using the TUNE/SEL knob.

2. Press the reconfigurable soft key next to the

Move prompt.

3. Turn the TUNE/SEL knob to move the point to

the desired location.

4. Press the reconfigurable soft key next to the

OK prompt to confirm the change.

Calc (Calculation):

Press this key to start route

calculation.

Back:

Press this key from the Trip Points Menu

to return to the main Navigation Menu.

Enter Destination

Press the Enter Dest key to display the Enter
Destination menu. This menu will give you more
ways to plan a trip.

Summary of Contents for CTS 2007

















































































































































Search results

Summary of Contents for CTS 2007

Reviews:

Related manuals for CTS 2007

Brands by name

Popular brands

Cadillac CTS 2007, User Manual

Search results

Summary of Contents for CTS 2007

Reviews:

Related manuals for CTS 2007

Brands by name

Popular brands