Cadillac CTS 2007 User Manual Download Page 29

Page: 29 / 144

Clock

Select Clock to set the time and adjust other time
options.

Hr +/

−

Press the key next to Hr+ or Hr

−

increase or decrease the hour on the clock.

Min +/

−

Press the key next to Min+ or Min

−

increase or decrease the minutes on the clock.

Auto GPS Update:

Select this item to set

the navigation system time to GPS time. Your
vehicle needs to be in an open area to receive the
signal. See

Global Positioning System (GPS) on

page 57

for more information.

Daylight Savings Time:

Select this item to

observe daylight savings time. An X will appear to
show this item has been turned on.

Select Time Zone:

Select this item to choose the

correct time based on the time zone you live in.
Choose between Atlantic, Eastern, Central,
Mountain, Pacific, Alaskan, and Hawaiian.

Turn the TUNE/SEL knob to scroll through the
choices and press the knob to set your selection.
The current time for that time zone will appear
on the display along with an X to show it has been
selected.

12h/24h:

Select this item to choose between 12h

for standard time or 24h for military time.

Press the TUNE/SEL knob to switch between the
two choices, then press the key next to the OK
prompt to set your choice.

You must press the OK key to save any
adjustments you have made to the time options,
or they will be lost.

Press the Back key to exit the Clock menu without
saving your changes.

Summary of Contents for CTS 2007

















































































































































Search results

Summary of Contents for CTS 2007

Reviews:

Related manuals for CTS 2007

Brands by name

Popular brands

Cadillac CTS 2007, User Manual

Search results

Summary of Contents for CTS 2007

Reviews:

Related manuals for CTS 2007

Brands by name

Popular brands