![background image](http://html1.mh-extra.com/html/cadco/rs1125ao/rs1125ao_instruction-manual_480664018.webp)
18
Fig. J
10) With door completely down and
door safety lock in its down position,
move door in a closing direction until
door safety lock stops the closing action
as in
Fig. J.
11) Hold door as shown in
Fig. K.
Fig. K
Fig. L
12) Slightly lift and swing door out of
unit as shown in
Figs. L & M.
Fig. M
Reverse above procedure to attach door to oven.
Fig. N
NOTE: For the door to be
properly reinstalled,
the notch on the bottom
of the hinge finger (
Fig. N
)
must be seated in
the inner door hinge frame
(
Fig. O
)
Fig. O
V. OPTIONAL DIGITAL CONVECTION OVENS ACCESSORIES
•
XALT195 Full Size Proofer
♦
Must be used with a full size Digital Oven with Dynamic control panel
(oven models: XAFT-188 and XAFT-195)
♦
Oven and proofer are both set using the Digital Oven Dynamic control panel.
♦
The proofer must be on a separate power source from the oven.
♦
Capacity of 8 full sized (18”x 26”) sheet pans.
•
XALT135 Half Size Proofer
♦
Must be used with a half size Digital Oven with Dynamic control panel
(oven models: XAFT-115 and XAFT-135).
♦
Oven and proofer are both set using the Digital Oven Dynamic control panel.
♦
The proofer must be on a separate power source from the oven.
♦
Capacity of 8 half sized (13”x 18”) sheet pans.
•
OV-HDS Heavy-Duty 2-Oven Stand with Wheels
(half +/or quarter size size)
♦
Accommodates two half or quarter size Cadco Convection Ovens
•
OST-195 Oven Stand with Wheels
(full size)
(Note: Shorter oven feet must be used when placing oven on this stand.)
♦
Accommodates oven models: XAF-183, XAFT-188, XAF-193 & XAFT-195