Cabletron Systems SSR-ATM29-02, User Manual, Page: 99 / 386

CoreWatch User’s Guide 99
Chapter 7: Configuring VLANs on the SSR
4. Do one of the following:
– If you want to change the ports of a port-based VLAN, double-click the Port Based
VLANs object.
– If you want to change the ports of a protocol-based VLAN, double-click the
Protocol Based VLANs object.
5. From the list of VLANs that appears, double-click the VLAN you want to modify and
then click that VLAN’s Bound Port List object.
A Bound Port List dialog box similar to the following appears:
Figure 45. Bound Port List Dialog Box
6. Add and remove ports from the VLAN as necessary.
– To add a port, double-click that port’s module in the Available Port list. From the
list of ports that appears, select the port you want to add and click the Add button.
Configuration Expert moves the selected port from the Available Port list to the
corresponding module in the Selected Port list.
– To remove a port, double-click that port’s module in the Selected Port list box.
From the list of ports that appears, select the port you want to remove and click the
Remove
button.
Configuration Expert moves the selected port from the Selected Port list to the
corresponding module in the Available Port list box.