manualshive.com logo in svg

Cabletron Systems SSR-ATM29-02, User Manual, Page: 327 / 386

Share
Download
Cabletron Systems SSR-ATM29-02 User Manual Download Page 327

CoreWatch User’s Guide

327

Chapter 21

Obtaining Reports

While monitoring an SSR, you may want to keep a record of the information found in the 
SSR boot log or any CoreWatch table. You may keep such records by saving the boot log or 
CoreWatch table information to a CoreWatch report, which is an HTML file.

This chapter discusses obtaining reports that include boot log information or data from 
multiple CoreWatch tables. This chapter also discusses saving a single table as a report.

You can view a CoreWatch report in your Web browser either immediately after the report 
is generated or at a later time.

Saving Multiple Tables or the Boot Log as a Report

To obtain a report that includes boot-log information or data from more than one 
CoreWatch table:

1.

Do one of the following:

–

Select the File menu and then choose Reports.

–

Click the Reports button 

 on the CoreWatch toolbar.

The Report Selection dialog box appears.

Summary of Contents for SSR-ATM29-02



































































































































































































































































































































































































Reviews:

No comments