Cabletron Systems SSR-ATM29-02, User Manual, Page: 231 / 386

CoreWatch User’s Guide 231
Chapter 13: Configuring Security on the SSR
Adding or Modifying ACL Rules
To add a rule to an existing ACL or modify an ACL’s rule:
1. Start Configuration Expert if you have not already done so.
2. Open the configuration file you want to modify and then double-click that file’s
Security Configuration object.
3. Do one of the following:
– Double-click the IP Security object and then the IP ACLs object if you are
modifying an IP ACL.
– Double-click the IPX Security object if you are modifying an IPX ACL. Then
double-click the object (IPX ACLs, IPX RIP ACLs, or IPX SAP ACLs) appropriate
for the type of IPX ACL you are modifying.
4. In the list of ACLs that appears, double-click the ACL you want to modify. Then click
one of the following:
– The rule you want to modify.
– The Create New Rule object. Click this object if you want to add a new rule.
5. Edit the ACL Rule Definition dialog box that appears.
The dialog box’s rule options are the same as those you specify when creating a new
ACL. For details on an ACL’s rule definition, see the section that discusses creating that
type of ACL.
6. Click OK.
Modifying Layer-2 Security Filters
You can modify the settings of Layer-2 security filters and change their port bindings.
Separate discussions on performing these tasks follow.
Modifying a Filter’s Settings
To modify a filter’s settings:
1. Start Configuration Expert if you have not already done so.
2. Open the configuration file you want to modify and then double-click that file’s
Security Configuration object.
3. Double-click the L2 Security object.
4. Double-click the object appropriate for the type of filter you want to edit (L2 Address
Filters, L2 Port Address Lock Filters, L2 Secure Port Filters, or L2 Static Entries).