Cabletron Systems SSR-ATM29-02, User Manual, Page: 162 / 386

Chapter 11: Configuring the SSR for IPX Routes
162 CoreWatch User’s Guide
– If you are modifying a VLAN-bound interface, click the interface’s VLAN object,
select a new VLAN from the VLAN Name drop-down list that appears in the
Interface Definition dialog box, and click OK.
9. If you want to change which ACLs are applied to the interface, double-click the
Bound IPX Security object. Use the Update ACL List dialog box that appears to add
and remove ACLs. You can apply two of each of the different IPX ACLs (IPX, IPX RIP,
and IPX SAP) to an IPX interface.
Figure 91. Update ACL List Dialog Box
You can add an ACL by selecting it in the Available IPX ACLs box and then clicking
Add
. You can remove an ACL by selecting it in the Selected ACLs box and then
clicking Remove.
Note:
You may also apply an IPX ACL by copying it as discussed in “Copying an
ACL to Apply It to an Interface” on page 213 .
10. Click OK.
11. If you want to change the type of traffic an ACL filters out on the interface, click the
IPX ACL located in the interface’s Applied IPX ACL object.
The interface’s Edit ACL dialog box appears.