Cabletron Systems SSR-ATM29-02, User Manual, Page: 119 / 386

CoreWatch User’s Guide 119
Chapter 9
Configuring
Unicast Routing on
the SSR
IP can perform unicast routing using RIP. Configuration Expert lets you configure the SSR
for RIP. This chapter
• discusses configuring unicast parameters and static entries that can be used by RIP.
• provides an overview of RIP.
• discusses configuring RIP global parameters, defining IP RIP interfaces, and adding
RIP gateways.
In addition to configuring the SSR for unicast routing, you can configure the SSR for
multicast routing and IPX. For details on multicast routing, see
Chapter 10: “Configuring
Multicast Routing on the SSR” on page 135 . For details on IPX, see Chapter 11:
“Configuring the SSR for IPX Routes” on page 147 .
Note:
Before you begin configuring your SSR for unicast routing, you should create the
IP interfaces you want to use for unicast routing. For details, see
“Creating IP
Interfaces” on page 103 .
Configuring Unicast Global Parameters and Static
Entries
Configuration Expert lets you configure settings that will be applied to RIP. It also lets you
set up static route entries and static ARP entries. Separate discussions on setting unicast
global parameters and configuring the different static entries follow.