Cabletron Systems SSR-ATM29-02, User Manual, Page: 253 / 386

CoreWatch User’s Guide 253
Chapter 14: Configuring OSPF on the SSR
h. To add another link, select the Add More Link check box, click Next, and then
continue repeating step a through step g until you add all the appropriate
neighbors.
17. Click Finish.
Modifying Area Tables
To modify existing area tables:
1. Start Configuration Expert if you have not already done so.
2. Open the configuration file you want to modify and then double-click that file’s
Routing Configuration object.
3. Double-click the IP Routing Configuration object.
4. Double-click the IP Unicast Routing object and then double-click the OSPF Area Table
object.
5. Double-click the area table you want to modify.
Configuration Expert lists the objects of the table you are modifying.
6. Double-click the type of object (Networks Interfaces, and so on) you want to modify.
Click the object you want to modify.
7. Edit the object’s dialog box.
LSA Retransmission
Interval Enter the number of seconds between link-state
advertisement retransmissions for adjacencies belonging
to the virtual link. Specify a number equal to or greater
than 1.
Transit Delay Enter the estimated number of seconds required to
transmit a link-state update over the virtual link.
Transit delay takes into account transmission and
propagation delays and must be greater than 0. Specify a
number equal to or greater than 1.
Hello Interval Enter a number from 0 to 255 to specify the estimated
number of seconds between hello packets that the router
sends on the virtual link.
Router Dead Interval Enter a number from 0 to 255 to specify the number of
seconds that may occur without Hello packets being
heard before the router’s neighbors will declare it down.
Table 33. Virtual Link Options (Continued)
Option Description