Cabletron Systems SSR-ATM29-02, User Manual, Page: 250 / 386

Chapter 14: Configuring OSPF on the SSR
250 CoreWatch User’s Guide
Figure 165. OSPF Area Stub Host Panel
To add a stub host, take the following steps:
a. Enter the address of the stub host.
b. Enter an integer value from 0 to 65535 to specify the cost that should be
advertised for the directly attached stub host.
c. To add another stub host, select the Add More Stub Hosts check box, click Next,
and then repeat
step a and step b until you add all the appropriate stub hosts.
16. If you are configuring the backbone area and you need to define virtual links, do so by
taking the following steps. Otherwise, skip to step 17 .
a. Click Next.