Cabletron Systems SmartSwitch 6E123-50, User Manual

Page: 119 / 164

Interface Statistics Screen
2E42-27/2E42-27R/2E43-27/2E43-27R User’s Guide 5-67
Frames Rcvd (Read-Only)
Displays the number of frames received by the interface since last
power-up or reset.
Frames Txmtd (Read-Only)
Displays the number of frames transmitted by the interface since last
power-up or reset.
Frames Fltrd (Read-Only)
Displays the number of frames filtered by the interface since last
power-up or reset.
Frames Frwded (Read-Only)
Displays the number of frames forwarded by the interface.
[1-12], [13-24], or [25-27] (Navigation Key)
When the Switch Statistics screen displays, the statistics are displayed for
the first 12 ports. These fields allow the user to step to a second or third
screen for the same type of information for ports 13 through 24 or 25
through 27. While on the second or third screen, the user can navigate
back to earlier screens by highlighting the [1-12]
and/or [13-24] fields and
pressing ENTER.
CLEAR COUNTERS (Command)
This command clears all the counters of the ports displayed to zero. To
clear the counters, use the arrow keys to highlight CLEAR COUNTERS
at the bottom of the screen, then press ENTER.
5.21 INTERFACE STATISTICS SCREEN
The Interface Statistics screen, Figure 5-28 , is used to gather MIB-II
statistics for all the 2E4X-27 interfaces with the exception of an installed
HSIM.
NOTE
Cabletron Systems HSIMs gather their own statistics, and may
be viewed via the Local Management screens of the applicable
HSIM. Refer to your HSIM documentation for information on
how to access these screens.