Cabletron Systems SmartSwitch 6E123-50, User Manual

Page: 46 / 164

Chapter 4: Troubleshooting
4-2 2E42-27/2E42-27R/2E43-27/2E43-27R User’s Guide
NOTE
The terms flashing, blinking, and solid used in the following
tables indicate the following:
Flashing indicates an LED flashing randomly.
Blinking indicates an LED flashing at a steady rate
(approximately 50% on, 50% off).
Solid indicates a steady LED light. No flashing.
Table 4-1 LANVIEW LEDs
LED Color State Recommended Action
PWR Green Functional. Power
supply(ies) operating
normally. No action.
Amber Indicates loss of power
supply redundancy.
This indication only
applies when there are
two power supplies. 1. Ensure that the power cords
are plugged in correctly and
that there is power at the
power source.
2. Contact the Cabletron
Systems Global Call Center.
CPU Off Power off. Power up device.
Red Blinking. Hardware
failure has occurred. Contact the Cabletron
Systems Global Call Center.
Solid. Resetting,
normal power up reset. No action.
Amber Blinking. Crippled. Contact the Cabletron
Systems Global Call Center.
Solid. Testing. No action.
Green Solid. Functional. No action.
Amber
and
Green Booting. Blinks amber
and green while
booting. No action.