Cabletron Systems SmartSTACK ETHERNET ELS10-27, User Manual

Page: 66 / 126

2-6
Unpacking and Installing Your SmartSTACK Ethernet ELS10-27
Figure 2-2. Installing an EPIM
Note: Installing an EPIM replaces one of the 100TX ports.
2.3 INSTALLING THE SMARTSTACK ETHERNET
ELS10-27
Rack-mounting a SmartSTACK Ethernet ELS10-27
Table 2-3 describes some general considerations you should be aware of
before mounting a SmartSTACK Ethernet ELS10-27 in a rack assembly.
Table 2-3. General Considerations for Mounting a
SmartSTACK Ethernet ELS10-27
Consideration Discussion
Temperature Since the temperature within a rack assembly
may be higher than the ambient room
temperature, make sure the rack environment
temperature is within the Operating
Temperature range speciÞed in Appendix A.
Air Flow Make sure there is at least 2 inches (or more)
on both sides of the SmartSTACK Ethernet
ELS10-27 to allow for adequate air ßow.
EPIM100
EPIM100
EPIM-100FX
LNK
EPIM-100FX
LNK
25X 26X 27X
10BASE-T/100BASE-TX
LINK
ST
A
TUS
LINK
ST
A
TUS
LINK
ST
A
TUS