Cabletron Systems SmartSTACK ETHERNET ELS10-27, User Manual

Page: 48 / 126

1-32
Introduction
Enter <CR> to continue, Cntl-C to exit:
If desired, you can specify a MAC address to be searched for and
optionally a mask.
ELS10-27> address display 08:00:20:79:fb:df
Bridge
The bridge command allows you to specify whether transparent bridging
(Spanning Tree) should be enabled on a per port basis. If only the bridge
command is speciÞed, the following is displayed:
ELS10-27> bridge
Usage: bridge [PORT-RANGE [{off | on | noBPDU}]]
01:80:c2:00:00:0e Reserved ** 2760312
01:80:c2:00:00:0f Reserved ** 2760312
01:80:c2:00:00:10 All LANs ** 2760312
01:40:27:00:54:72 Reserved ** 2760312
00:00:1d:66:88:4e Port 1 2760312
01:00:0e:00:00:01 Filter ** 5767
Address Type Port Age(secs)
08:00:20:79:fb:df Learned 17 0
Port 1 bridging: Transparent Bridging
Port 2 bridging: Transparent Bridging
Port 3 bridging: Transparent Bridging
Port 4 bridging: Transparent Bridging
Port 5 bridging: Transparent Bridging
Port 6 bridging: Transparent Bridging
Port 7 bridging: Transparent Bridging
Port 8 bridging: Transparent Bridging
Port 9 bridging: Transparent Bridging