Central Site Remote Access Switch 329
C
ONFIGURING
IPX
IPX Network Interfaces
IPX N
ETWORK
I
NTERFACE
B
ACKGROUND
I
NFORMATION
Traditional routing products ask you to define the network interfaces to which the router is directly
connected:
LAN I
NTERFACES
LAN network interfaces are fixed broadcast media type interfaces. These interfaces are assigned a
specific network number and all devices on that LAN must agree on the IPX network number used
on the LAN segment. The LAN network interface is a regular IPX interface used to connect the
system to the LAN. The Ethernet frame types supported under the IPX protocol include:
•
Novell 802.3. This is the Novell default frame format for NetWare 2.x and 3.x servers.
•
Novell SNAP. The DSAP and SSAP values indicate SNAP encapsulation.
•
Ethernet 802.2. The Novell default frame format with NetWare 4.x software for CSMA/CD is
Ethernet 802.2. The DSAP and SSAP values indicate that the frame contains an IPX packet.
•
Novell Ethernet II. Ethernet protocol id field indicates that the frame contains an IPX packet.
WAN I
NTERFACES
The CyberSWITCH connects IPX router devices over ISDN and other digital WAN links. Routers
operate at the network protocol layer and understand the logical topology of the IPX intranet.
The CyberSWITCH uses the NetWare Routing Information Protocol (RIP) to transmit its routing
information on the network. This protocol periodically broadcasts routing table updates on the
network. A dynamically learned entry is aged out of the system’s routing table if the route entry is
not verified by the periodic RIP broadcasts.
In a similar manner, the system uses the NetWare Service Advertisement Protocol (SAP) to
transmit its service table information on the network.
The system supports the standard NetWare RIP and SAP protocols as described in the Novell’s
document, “IPX Routing Specification.”
R
EMOTE
LAN I
NTERFACES
CyberSWITCH uses a Remote LAN interface to connect remote bridge devices to other IPX router
network interfaces. The IPX router treats all bridge devices connected to the Remote LAN as if they
were on an Ethernet LAN segment. That is, the system emulates an Ethernet medium over the
series of ISDN point-to-point connections. The IPX router encapsulates IPX data for the Remote
LAN interface in Ethernet packets and forwards the data to the remote bridges.
If the remote LAN only has NetWare clients connected to it, these clients will assume the IPX
network number assigned to the Remote LAN interface. For these “simple” remote networks, it is
not required to configure an IPX network number for the remote bridge device. When the bridge
connects, it looks for the first configured IPX Remote LAN interface, and uses it as a default.
Currently, we do not support a remote LAN with both NetWare servers and clients connected to it.
