Model 4000C Instruction Manual
Page 70
CARE OF THE MODEL 4000C
MAINTENANCE
The most common source of trouble with the Model 4000C is poor connection with the harness
or circuit being tested. This problem can be prevented or reduced by routine inspection for
damage, wear, or foreign matter. Be especially aware that poor connections during the learn-
known-good process will prevent a complete wire list program.
Cleaning of the controls, front panels, and other surfaces may be done with any mild soap and
water. All "wetted" areas must be thoroughly dried after cleaning.
REPAIR
If the Model 4000C requires repair due to any defect of manufacture, and it is within the
warranty period, contact Cablescan, Inc., for instructions on returning it to the factory. Even if
the Model 4000C is beyond the warranty period, and repair is necessary, it is advisable to return
the unit to the factory for repair.
If it is necessary for the user to replace parts, the replacement parts must be Cablescan, Inc.,
parts, or parts of equivalent rating and quality.
NOTE:
Please read "Warranty" in the front of this manual.
MEMORY BACKUP BATTERY
If it is determined that the backup battery is faulty, do not attempt replacement of the battery.
Battery replacement must be done by Cablescan, Inc. The battery is an integral part of the
memory IC socket and requires replacement of the complete socket.
Summary of Contents for 4000C
Page 1: ...CONTINUITY TESTER MODEL 4000C Cablescan ...
Page 82: ...NOTES ...
Page 83: ...5900330 Rev C Cablescan ...
