- 23 -
Test process
Test time setting
Interface selection
Plan selection
Each time you finish
changing the
parameters, you need
to press Plan Modify.
Set time: It means the time required for each step, can be changed at the "Washing Plan" interface.
Washing plan
According to the amount of mixed material and the content of mineral powder to set different
parameters. Multiple washing plans can be saved according to different mixtures (Figure 33);
Start Centrifuge: the time for the centrifuge to rise from 0 to the maximum speed, it is recommended
not to be less than 1 minute;
Soak: the time that the mixture is soaked in the washing chamber or rubber asphalt washing
chamber;
Wash cycles: During the washing cycle, the number of times the washing chamber or rubber asphalt
washing chamber is filled with liquid;
Chamber empty: The time for draining the washing chamber or the mixture liquid in it to the low level,
it is recommended not to be less than 2 minutes;
Interval flushing: During the set time period, intermittently inject liquid into the washing chamber or
rubber asphalt washing chamber;
Centrifuge dry: The time for fully separation of the mineral powder and the mixture liquid before the
drying process starts;
Aggregate dry: The time used for the drying process of the aggregate and mineral powder;
Figure 33
