- 60 -
Figure 12
The locking spring of condenser (6) will be installed on the locking nut (5), nudging locking spring
(6) to the 50 # flange of the glass condenser, as shown in figure 13.
Figure 13
Install the glass condenser which is equipped with the condenser locking nut (5) and the locking
spring (6) on the left side of the rotating axis.
Keep the collecting bottle interface of glass
condenser down, clockwise rotate the condenser locking nut (5) to tighten, as shown in figure
14.
Figure 14
Insert the condenser pole (13) into the corresponding fixing hole on the host machine, and
tighten the fixing screw of the pole, as shown in Figure 15
