- 17 -
⑬
.
Pour out the aggregate in the washing drum and the mineral powder in the centrifuge cup, and
clean the washing drum and the centrifuge cup.
⑭
.
After the test is completed, close the washing chamber cover and the centrifuge movable cover.
⑮
.
Turn off the power switch of the chiller and equipment, and disconnect the power supply.
⑯
.
Perform routine maintenance on equipment.
Testing method for rubber asphalt mixture
①
.
Open the rubber asphalt cover, as shown in Figure 27. Remove the rubber washing drum
assembly with the transfer handle.
②
.
Click the " Rubber Wash" button on the startup interface.
③
.
Click the "Balance" tab and click the "Balance zero" button. Weigh the washing drum, and click
"Washing Drum (g)", as shown in Figure 25;
④
.
Pour the prepared asphalt mixture into the rubber washing drum, weigh it and enter it into the
system, as shown in Figure 26.
Figure 23
