- 4 -
IMPORTANT NOTE: This manual does not replace testing and technical training of workers, but it must
be seen as a guide to perform its functions. In addition, the operator should be aware of all standards
and rules in the manual regarding the correct use of the equipment and related test performance. It
is the responsibility of the installer, laboratory or site manager to understand this manual. The
manufacturer can provide further information.
II.
Technical specifications and installation
Technical specifications
Model
HTHY-8159A
HTHY-8159
Maximum sample weight
Conventional Asphalt Mixture 3.5Kg
Conventional Asphalt Mixture 3.5Kg
Rubber Asphalt Mixture 1.5Kg
/
Centrifuge speed
Not less than 8000r/min
Not less than 8000r/min
Centrifuge cup capacity
Less than 300g
Less than 300g
Distillation capacity
Main heater 10L/h
Main heater 10L/h
Main auxiliary heater: 35L/h
Main auxiliary heater: 35L/h
Power supply
AC220V 50Hz
AC220V 50Hz
Dimensions
1300 x 800 x 1700 mm
1300 x 800 x 1700 mm
Weight
200kg
200kg
Installation
Unpacking
After unpacking, check the integrity of the equipment for any visible damaged parts. When in doubt,
do not use the device and contact the manufacturer.
WARNING!
The parts used for packaging (plastic bags, polystyrene, nails, screws, boards, etc.)
must be kept out of the reach of children because they are dangerous. These parts
should be placed in suitable containers.
This equipment must be installed horizontally on a stable floor. It is recommended to install the
equipment in a standard fume hood, and operate as required, connect the overpressure protection
