- 2 -
During operation, check the condition of the equipment. If it is in a dangerous situation, stop working
immediately and consult the manufacturer's after-sales service department. It is the customer's
responsibility to verify whether the installation or use is carried out according to the instructions.
Please contact the manufacturer when in doubt.
Operator
WARNING!
Only qualified personnel are allowed to use, transport, install, maintain, dismantle
and dispose of the equipment. This manual is specially written for qualified
operators and contains the necessary information for using the equipment.
"Qualified Operator" means a person who has been trained, has done relevant tests, is familiar with
relevant standards, restrictions and measures, is authorized by the factory safety manager, can
perform any necessary activities, and can identify and avoid any possible hazards.
The manufacturer recommends strictly abide by the instructions, procedures, recommendations and
effective work safety regulations in this manual, and even use appropriate protective equipment
(whether it is a person or a part of a machine).
Be familiar with and follow the instructions, safety warnings and dangers in this manual in order to
minimize the risks of installation, operation, management and maintenance.
Responsibilities and obligations of factory safety managers
Know the functions of this equipment, its instructions, safety protection devices, possible hazards during use,
and all the detailed information in this manual, you can obtain knowledge of these aspects by carefully reading
this manual.
Before using this equipment, properly train and educate "qualified operators", and carefully train these
personnel with regard to the protective device of the machine.
In order to operate the equipment, it is necessary to understand the current safety regulations in detail, and
arrange qualified operators for transportation, handling, installation, use, maintenance and disposal, etc.
Ensure that the safety device of the equipment is not damaged or disassembled, and check it every day.
Provide operators with appropriate personal protective equipment.
The manufacturer can explain, provide assistance and training for untrained personnel who cause damage to
